Blending Vector Art - Adobe Illustrator/Photoshop

ASR: en

0:00:01.610,0:00:05.490
hey guys welcome back to home video of

0:00:03.959,0:00:07.080
great across the stream with greeting

0:00:05.490,0:00:09.000
planning vector art we planning to

0:00:07.080,0:00:10.830
design with different techniques we

0:00:09.000,0:00:12.360
using pen tool to draw the code line to

0:00:10.830,0:00:14.400
draw add effects and according to

0:00:12.360,0:00:17.070
traffic alerts so that's been a tutorial

0:00:14.400,0:00:18.660
open a new illustrator artboard select

0:00:17.070,0:00:21.330
the pen tool remove the fill color and

0:00:18.660,0:00:23.820
keep the stroke color black now draw out

0:00:21.330,0:00:26.519
a wavy curved lines make it smooth and

0:00:23.820,0:00:28.650
scale it down in the same way draw it on

0:00:26.519,0:00:31.260
the core with different structure we'll

0:00:28.650,0:00:32.669
make this little bit smaller now select

0:00:31.260,0:00:35.640
body curves using the selection tool

0:00:32.669,0:00:37.649
that's like the blend tool click on the

0:00:35.640,0:00:39.570
top left corner of the code and then

0:00:37.649,0:00:42.390
click on the bottom left corner when the

0:00:39.570,0:00:44.789
plus sign shows this will create a

0:00:42.390,0:00:46.440
blending object between two curves to

0:00:44.789,0:00:48.809
increase the number of steps double

0:00:46.440,0:00:51.270
click on the planning tool icon a panel

0:00:48.809,0:00:53.850
will open here set the spacing to

0:00:51.270,0:00:56.940
specified steps and then increase number

0:00:53.850,0:00:59.070
of steps setting numbers and then check

0:00:56.940,0:01:01.500
out with different values for this let's

0:00:59.070,0:01:05.129
give around one zero six steps and click

0:01:01.500,0:01:07.200
OK now place the design aside let's draw

0:01:05.129,0:01:09.240
the curve using the pen tool this curve

0:01:07.200,0:01:10.890
will be used to give a specific path to

0:01:09.240,0:01:13.140
design you can see the planning between

0:01:10.890,0:01:15.600
two curves are straight so to give some

0:01:13.140,0:01:17.549
dynamic look we'll use the scope adjust

0:01:15.600,0:01:19.979
the coab as per your desired look after

0:01:17.549,0:01:23.310
that select all and go to object blend

0:01:19.979,0:01:25.320
replace climb this will act as a spline

0:01:23.310,0:01:27.780
for the blends you can edit the spline

0:01:25.320,0:01:30.150
by double clicking and adjusting the go

0:01:27.780,0:01:31.770
using direct selection tool do the

0:01:30.150,0:01:34.079
changes in the planning part to get

0:01:31.770,0:01:36.810
better flow at it each curves if it is

0:01:34.079,0:01:39.150
necessary after everything is set let's

0:01:36.810,0:01:41.759
increase the steps to 181 add a

0:01:39.150,0:01:44.009
background with a dark blue color set

0:01:41.759,0:01:46.770
our design on the top change the stroke

0:01:44.009,0:01:48.720
thickness to 0.5 points and the stroke

0:01:46.770,0:01:51.490
color to white there are some

0:01:48.720,0:01:54.189
irregularity in bland so let's edit

0:01:51.490,0:01:56.500
little more make all the spacing even to

0:01:54.189,0:01:58.960
give a nice look after this select the

0:01:56.500,0:02:01.750
top go and add a gradient color to the

0:01:58.960,0:02:04.210
stroke double click on the left gradient

0:02:01.750,0:02:06.729
slider and select the paint color add a

0:02:04.210,0:02:08.979
little red tone and failure too little

0:02:06.729,0:02:10.509
and the same way add a color on the

0:02:08.979,0:02:13.060
right gradient slider with the same

0:02:10.509,0:02:14.440
color then select the bottom cope and

0:02:13.060,0:02:16.930
apply the gradient with the same color

0:02:14.440,0:02:19.090
value to get some interesting effect

0:02:16.930,0:02:22.000
let's change the topcoat gradient to

0:02:19.090,0:02:24.489
blue color apply to both the sliders now

0:02:22.000,0:02:27.760
you can see a nice color transition from

0:02:24.489,0:02:29.470
blue to a faded pink to add more details

0:02:27.760,0:02:31.750
let's decrease the stroke thickness to

0:02:29.470,0:02:36.040
0.25 points and increase the steps to

0:02:31.750,0:02:38.170
around 271 and we got more highlights

0:02:36.040,0:02:40.120
and effects to do more adjustments let's

0:02:38.170,0:02:41.980
drag to design a Photoshop scale it down

0:02:40.120,0:02:44.470
and add a background in contrast edges

0:02:41.980,0:02:47.319
layer increase the contrast value around

0:02:44.470,0:02:49.090
28 and a brightness value around 22 this

0:02:47.319,0:02:50.950
will add a glossy highlight effect and

0:02:49.090,0:02:53.079
if you switch off the effects you can

0:02:50.950,0:02:54.220
see the changes you can remove color

0:02:53.079,0:02:56.350
variation using the hue and saturation

0:02:54.220,0:02:58.090
as it Munir check out with different

0:02:56.350,0:02:59.799
color shades and finally off was

0:02:58.090,0:03:01.810
designed for planning vector art is done

0:02:59.799,0:03:04.780
this was the first time need to create

0:03:01.810,0:03:06.430
such design let's use our second

0:03:04.780,0:03:07.600
technique of create under design so for

0:03:06.430,0:03:10.180
the second design we'll start off with

0:03:07.600,0:03:12.819
pen tool draw a cope with white stroke

0:03:10.180,0:03:14.980
brother make a wavy coat in a circular

0:03:12.819,0:03:17.380
path with the endpoints finishing close

0:03:14.980,0:03:20.049
to each other edges the cope using

0:03:17.380,0:03:23.230
dissection to use the handles to edges

0:03:20.049,0:03:25.660
to Direction create one more wavy curved

0:03:23.230,0:03:28.690
lines but this time it's overlapping to

0:03:25.660,0:03:31.090
each other after this edges each vertex

0:03:28.690,0:03:32.799
is manually then select bode curves and

0:03:31.090,0:03:36.370
apply the blending shapes using this

0:03:32.799,0:03:38.950
same method click the top left points

0:03:36.370,0:03:41.049
and then the other point will get one

0:03:38.950,0:03:43.690
step by default we'll keep it like this

0:03:41.049,0:03:45.790
we'll use this miracle to give different

0:03:43.690,0:03:47.880
direction and to add unique shapes which

0:03:45.790,0:03:50.500
was not possible with a previous matter

0:03:47.880,0:03:53.530
so first of all like to design and go to

0:03:50.500,0:03:54.940
object expand then right-click and

0:03:53.530,0:03:58.180
ungroup it

0:03:54.940,0:03:59.590
this will separate out each go you can

0:03:58.180,0:04:01.720
select the middle Cove and do the

0:03:59.590,0:04:04.870
changes and just go to add a different

0:04:01.720,0:04:07.240
flow to replant it is the vertices to

0:04:04.870,0:04:09.310
give different pattern in between also

0:04:07.240,0:04:11.230
make sure there are no sharp corners

0:04:09.310,0:04:13.090
everything should be smooth you can

0:04:11.230,0:04:14.200
expand them in different shapes and come

0:04:13.090,0:04:16.630
up with different designs

0:04:14.200,0:04:18.520
after completing the adjustments select

0:04:16.630,0:04:21.160
all the tree curves and use the blend

0:04:18.520,0:04:23.620
tool first click on the top code left

0:04:21.160,0:04:25.480
points then the middle collect points

0:04:23.620,0:04:27.880
and finally the bottom curve right

0:04:25.480,0:04:30.610
points then increase the steps to around

0:04:27.880,0:04:32.830
35 and stroke thickness to 0.25 points

0:04:30.610,0:04:35.800
now let's do a chitlin with individual

0:04:32.830,0:04:39.640
curves increase the steps to 180 to add

0:04:35.800,0:04:42.130
a gradient color to top stroke give blue

0:04:39.640,0:04:45.430
color to the left gradient slider and if

0:04:42.130,0:04:47.650
a dipping to right gradient slider then

0:04:45.430,0:04:49.870
change the rotation to minus 90 degree

0:04:47.650,0:04:52.360
this will keep the blue color on the top

0:04:49.870,0:04:54.040
and a faded pink on the bottom now

0:04:52.360,0:04:56.170
select the middle code and apply the

0:04:54.040,0:04:58.000
same gradient color and in the bottom

0:04:56.170,0:04:59.500
Cove and apply the free dipping to both

0:04:58.000,0:05:01.330
the slider after that double click

0:04:59.500,0:05:05.170
outside will reduce the stroke thickness

0:05:01.330,0:05:06.850
to 0.1 points and adjusted curves now

0:05:05.170,0:05:08.590
drag and drop to photoshop add

0:05:06.850,0:05:10.750
brightness and contrast as it's been

0:05:08.590,0:05:12.990
there and as is the value to add more

0:05:10.750,0:05:15.460
highlights and radius to the sea

0:05:12.990,0:05:16.930
finally our second design is ready we

0:05:15.460,0:05:19.510
have used very simple techniques to

0:05:16.930,0:05:21.730
create out this planning vector art we

0:05:19.510,0:05:23.230
can go further and add a nice bones and

0:05:21.730,0:05:25.300
unicorn refinement

0:05:23.230,0:05:26.920
I hope you enjoyed the tutorial if you

0:05:25.300,0:05:28.930
check out the next row coming off and

0:05:26.920,0:05:30.790
run more updates in designing go for

0:05:28.930,0:05:33.210
like share and subscribe this channel

0:05:30.790,0:05:33.210
thank you